53:43
Posted Monday, September 30, 2024
35:51
Dr. Janelle Wharry of Purdue University discusses her group's use of nanoindentation mapping to characterize stress corrosion cracking (SCC) of steel that is used in storing spent nuclear fuel. The research analyzed the nanomechanical properties before and after radiation exposure.
Posted Wednesday, September 28, 2022
31:48
Dr. Janelle Wharry of Purdue University discusses the use of nanoindentation mapping to understand chloride-induced stress corrosion cracking (SCC) mechanisms in cold spray (CS) coatings used as corrosion mitigation barriers. In addition. Dr. Wharry discusses hardness mapping of grains and along cracks induced by stress corrosion.
Posted Wednesday, August 31, 2022
36:25
Jennifer Hay of KLA Instruments discusses the use of nanoindentation on for 3D printed materials, and provides a demonstration of high-speed mechanical properties mapping using the iMicro nanoindentation system.
Posted Thursday, June 16, 2022
28:41
Professor Yu Zou of the University of Toronto discusses his research in a number of case studies, using nanoindentation techniques to characterize AM-printed materials.
Posted Thursday, June 16, 2022
07:46
演讲嘉宾：多伦多大学博士研究生-刘志颖
Posted Friday, September 17, 2021
24:08
Dr. Sudharshan Phani of the Advanced Nanomechanical Characterization Centre of ARCI (International Advanced Research Centre) presents his work in English.
Posted Friday, September 17, 2021
09:55
Bryan Crawford of KLA Instruments presents in English with Chinese subtitles. 演讲嘉宾：KLA Instruments - Bryan Crawford（英文演讲，配中文字幕）
Posted Thursday, September 16, 2021
20:49
Dominik Weil of KLA Instruments presents fun and unusual nanoindentation applications.
Posted Friday, July 23, 2021
01:00:15
With careful attention to instrumentation and software, nanoindentation experiments can be accomplished at a rate faster than one second per indent. High-speed indentation opens new doors for statistical analysis and mechanical-properties mapping.
Posted Wednesday, October 14, 2020
30:37
Dr. Warren Oliver provides an overview of applications in nanoindentation and examines recent research on high resolution mechanical properties mapping.
Posted Monday, July 6, 2020
10:33
Intrinsic hardness of each constituves phases of PcBN were evaluated. Three main hardness peaks were assessed which attributed to TiN binder, cBN particles and composite like phase. Hardness of cBN particles may vary in terms of Boron/Nitrogen ratio.
Posted Sunday, June 28, 2020
