54:23
Jennifer Hay of KLA Instruments demonstrates how to test bio or other soft materials using nanoindentation on the iMicro or iNano nanoindenter.
Posted Thursday, December 12, 2024
35:52
Jennifer Hay, Senior Applications Scientist at KLA Instruments, presents an overview and demonstration of how to conduct a scratch (tribology) test on a low-k film, using the iMicro nanoindenter.
Posted Wednesday, September 28, 2022
35:51
Dr. Janelle Wharry of Purdue University discusses her group's use of nanoindentation mapping to characterize stress corrosion cracking (SCC) of steel that is used in storing spent nuclear fuel. The research analyzed the nanomechanical properties before and after radiation exposure.
Posted Wednesday, September 28, 2022
35:48
Jennifer Hay of KLA Instruments demonstrates use of the iMicro nanoindenter to evaluate adhesion of low-k dielectric films using scratch testing.
Posted Thursday, September 1, 2022
31:48
Dr. Janelle Wharry of Purdue University discusses the use of nanoindentation mapping to understand chloride-induced stress corrosion cracking (SCC) mechanisms in cold spray (CS) coatings used as corrosion mitigation barriers. In addition. Dr. Wharry discusses hardness mapping of grains and along cracks induced by stress corrosion.
Posted Wednesday, August 31, 2022
36:25
Jennifer Hay of KLA Instruments discusses the use of nanoindentation on for 3D printed materials, and provides a demonstration of high-speed mechanical properties mapping using the iMicro nanoindentation system.
Posted Thursday, June 16, 2022
28:41
Professor Yu Zou of the University of Toronto discusses his research in a number of case studies, using nanoindentation techniques to characterize AM-printed materials.
Posted Thursday, June 16, 2022
32:07
Senior Applications Scientist Jennifer Hay discusses and demonstrates measurement of anti-reflective (AR) coatings using the KLA Instruments iMicro nanoindentation system.
Posted Thursday, March 24, 2022
32:27
Jenny Hay, Senior Applications Scientist at KLA Instruments, discusses the importance of characterizing the mechanical strength of anti-reflective coatings, including a live demonstration using the iMicro nanoindenter.
Posted Thursday, February 10, 2022
35:14
Grace McClintock of Pixelligent discusses the development and characterization of advanced display films, including nanomechanical analysis.
Posted Wednesday, February 9, 2022
01:05:08
Dr. Marzyeh Moradi of KLA Instruments discusses sample preparation and testing parameters, and performs a live demo of a nano-scratch test. Post-test optical images are also presented,
Posted Wednesday, December 8, 2021
53:38
Low-carbon steels are the first option when designing with steel. They offer good machinability and excellent weldability. To some extent, the strength and ductility can be manipulated by various thermal and mechanical processes, such as working, annealing, and carburization. This session is a live demonstration of standardized nanoindentation with the KLA iMicro nanoindenter to characterize co...
Posted Wednesday, July 10, 2019
